The corolla seen almost from above: yellow enamel inside the wavy silver rim, round amethyst at the centre

Collection Fiore d'Inverno·Anello

Fiore d'Inverno ring medium in silver with amethyst and yellow enamel

Sixteen millimeters of corolla, purple inside the yellow

€140,00 AA146Mam

Drawn and built by hand at the bench, in Tosi.

A silver corolla of sixteen millimeters, the rim left wavy and polished, and inside it the yellow of the enamel laid over the grooves that run out from the center. At the center a round amethyst in a plain setting: purple on yellow, the two furthest colors the collection puts together. The shank is hammered.

Six and a half grams of silver in all. The purple of the amethyst is the most delicate part of the piece: it stands up to scratches better than the silver that holds it, but it does not stand up to heat, and under a strong enough flame it would turn yellow for good.

The material

Weights and carats as the workshop declares them.

6,50 gramsSilver 925‰
Metals
Silver 925‰
Finish
Yellow enamel inside, polished edge
Dimensions
Diameter of the flower about 16 mm
Technique
Made by hand in the goldsmith's studio at Tosi. Hammered shank.

The stones

Amethyst

At the center of the corolla

Cut
Round faceted
Closer shot of the enameled cup, with the grooves running from the bezel to the rim
The ring standing: the hammered shank below the corolla is seen whole
Set among dry twigs, the yellow of the enamel against the light wood
The same scene from the side, with the irregular rim of the corolla against the light
Worn: the corolla resting on the finger gives the size of the flower

How it is made

The words of the trade, one by one, explained to those who do not know them.

Corolla from a single sheet
The corolla is not an assembly of petals: it is a single sheet, hollowed until it becomes a shallow cup and left irregular at the rim, with the folds running out from the center. The wavy rim cannot be corrected twice — stretched silver does not go back — so the first fold is the one that stays. In the middle of the cup is the one point that has to stay flat: it is the seat of the stone, and if the cup has moved there the setting does not sit.
Enamel
Enamel is glass: ground to a powder, laid on the metal and taken to several hundred degrees until it melts and becomes one surface with the piece. Before the fire it is wet powder that a breath will move; afterwards it cannot be retouched, because correcting one spot means putting all the color already fired back into the fire, and every pass risks a bubble, a cooling crack and a color that shifts. The families have their own names and are told apart by how the metal holds the color: champlevé, when the color sits in hollows cut into the sheet; cloisonné, when it sits inside little walls of wire soldered to the ground; cold enamel, when in place of the glass there is a resin that hardens without fire. They are different processes, and they are not assigned by eye.
Hammering
The shank is hammered until the surface takes on an irregular texture. No blow is like the one before it, so no ring is like another.
Amethyst
Amethyst is purple quartz, and the purple does not come from a pigment: it comes from a few iron atoms that ended up in the lattice in place of silicon and were then struck by the natural radiation of the rock. That is why the color is almost never laid on evenly — it arranges itself in zones and bands, heavier on one side and paler on the other — and orienting the stone properly under the wheel is exactly what spreads it. It is as hard as citrine, the seventh degree, and can be worn every day without worrying about scratches; but that purple is the most delicate thing it has. Strong continuous light fades it, and heat erases it altogether: an amethyst heated enough turns yellow, and that is how much of the citrine on the market is born. Purple once lost does not come back.

I don't look at what others are doing: I would rather create in my own style. That is what makes our jewelry recognizable.

Fabio Gori — Anna Gioielli, Tosi

Made for you

Every ring is made in the size of the person who will wear it: we settle it together before the work begins.

The goldsmith's workshop is also the place where made-to-measure jewellery is created and family pieces are restored: if you have an idea, or something you want brought back to how it was, that is where it starts.

Ask for a made-to-measure piece
Made by
Anna Gioielli

A goldsmith's workshop in Tosi, on the slopes of the Pratomagno: Anna opened it in 1988, her sons Fabio and Francesco carry it on. Piercing, repoussé, chasing and burin engraving — the Florentine school, with the workshop in full view of the shop.